INSPIRE CINEMATOGRAPHY PACKAGE
 
This carbon fibre drone was an impulse buy when I wanted to try more cinematographic shoots. As it was I ended up specialising in surveying with phantom (RTK). 
 
I bought this used and I think I’ve only flown it for a couple of hours at most. The previous owner had similar aspirations but seldom used it.
 
So I believe this drone only has a handful of hours flight and is still on the first set of rotors. The included second set has not been opened. 
 
My AIRDATA.com total air time 35 minutes.  One Battery shows life = 98%. The other one has not been used and is not showing on my records.
 
The drone has been modified to work Zenmuse X5R Camera and the X3 camera. This means there is a shock mount addition for the gimbal, and 4 small extension feet fixed to the legs so drone can land with sufficient camera clearance.

Included is the original Zenmuse X3 Camera.

The drone comes in the original flight case.

You can mount the X3 or the X5R camera to the DJI Osmo hand held gimbal and capture excellent stabilised photographs and video while traversing the ground.

I am also selling my DJI Osmo under a separate listing. (Click here to see the Osmo). This Osmo has only had a couple of hours use. 

Combine your drone footage with your hand held footage and you have everything you need to create your own masterpiece.

Everything is in excellent working condition with one caveat…,

There are two hand held controllers for the inspire, but unfortunately one is broken. It was dropped and one of the joystick mounts broke inside. I did take it apart to try and fix but never managed to complete the job. It could still be repaired. You would need to swap out one joystick assembly and you would need some screws to reassemble the unit. I put the screws somewhere safe but cannot find them. For transport I have taped the controller back together as shown in photos. 
 
DRONE INFO:
 
Drone Model: Inspire 1 V2.0 - Model T600
Battery Model: TB48 x 2
Weight: 3kg with battery + Zenmuse X3
Max Speed: 49mph.
 
DRONE CONTROLLERS: 
 
Model GL658C x 2 (one needs repaired)
 
CAMERA 1 INFO:
DJI Zenmuse X5R (RAW):
Micro Four Thirds sensor
Optics: 15mm F/1.7 ASPH
ISO Range: 100-25600
Lossless cinema 4K RAW video
Record at 4096 × 2160 (25fps) or
1920 × 1080 (60fps)16MP photographs
Average 1.7 Gbps bitrate (2.4Gbps maximum)12.8 stops of dynamic range
Cinema DNG / ProRes
On board 512GB SSD
 
The DJI Zenmuse X5R camera will also work with the DJI Osmo. (Click here to see Osmo).

CAMERA 2 INFO:
 
DJI Zenmuse X3 - Camera Model FC350
Pixels: 12.7M
Image Max Size: 4000x3000
Iso Range: 100-3200 Video
Iso Range: 100-1600 Photo
CMOS: 1/2.3” CMOS
Video Recording: Up To 4K
1 X ND Filter included for filming in bright light.
 
The DJI Zenmuse X3 camera will also work with the DJI Osmo. (Click here to see Osmo)
 
If you are looking to enter the arena of cinematic drone filming then try this first. The current model of the inspire will set you back approx £15k. The Inspire 1 might not be the best but it’s where it started.